To use this feature, you must configure the TV to enable HDMI ® ARC, as explained in Setting up a digital audio connection. This connection uses the Audio Return Channel (ARC) feature of HDMI ® to output sound from the TV to a compatible device. HDMI ® ARC – Connect an HDMI ® cable (not provided) from the HDMI (ARC) connector to the HDMI ® input on your receiver or soundbar.Digital optical audio out (S/PDIF) – Connect a TOSLINK optical cable (not provided) from the TV to the Optical input on your receiver or soundbar.You can enjoy Dolby Audio™ multichannel sound from your TV if you connect a digital amplifier or soundbar (not provided) in any of the following ways: Connecting an AV receiver or digital soundbar You might notice that connecting headphones to your remote shortens the remote’s battery life somewhat. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound. Warning: Loud noise can damage your hearing. The volume and mute controls on the right side of the remote adjust the volume level of the connected headphones. Tip: Inserting a plug in the remote’s headphone jack disables the sound from the TV’s built-in speakers or attached receiver or soundbar. On these models, you can connect headphones to the jack on the left side of the remote. Roku TVs come with the Roku Enhanced Voice Remote or Roku Voice Remote Pro.Connecting headphones to a Roku Voice Remote Pro To turn off the TV’s built-in speakers, from the Home screen menu, navigate to Settings > Audio > TV speakers and change the setting. Use this connection when you want to use your amplifier or soundbar to control the TV volume. Select models also have an audio line out connection that is not affected by TV volume or mute settings and does not disable the TV speakers. Tip: Inserting a plug in the headphone jack disables the sound from the TV’s built-in speakers. You can connect headphones or an analog soundbar (not provided) to the TV’s headphone jack. Additional details are provided in Choosing an audio format. Only on select models: The connector labeled HDMI (eARC) provides the same functionality as the HDMI ARC connector, plus the ability to pass through full-resolution sound formats such as Dolby Atmos and DTS:X from and to devices that support these formats, without additional processing by the TV. The connector labeled HDMI (ARC) has the additional ability to use the audio return channel to send digital audio to a receiver or soundbar, as explained in Connecting an AV receiver or digital soundbar. Tip: You might need to configure the device to send its signal through its HDMI ® connector. For better picture quality, we recommend that you use cables designated as High Speed HDMI ® Cables. They help to provide the best video quality and also carry audio signals, so that only one cable is needed. If possible, connect your devices using HDMI ® cables (not provided). Use the breakout cable (included) to adapt this input to the three RCA-type plugs on your composite cable.Ĭonnecting external equipment with an HDMI ® cable Note: Select models have an AV Input that looks like a headphone jack. Composite AV cables typically have three RCA-type plugs on each end, color coded as follows:Ĭonnect each plug to the corresponding connector on the device and on the TV. If the best connection available on your device is AV or composite video output, connect it to the TV using a composite AV cable (not provided). Antenna input – analog SD video using NTSCĬonnecting external equipment with a composite AV video cable.Tip: If you receive your TV stations through a set top box from a cable or satellite TV provider, connect it to the TV using the best connection method available. Tip: If you are using an antenna with a 300-ohm twin-lead cable, you need to use a 300-to-75-ohm adapter (not provided) to adapt the twin-lead cable to a connection that is compatible with the TV’s antenna input. If you are using an antenna, CATV cable without a set-top box, or a cable or satellite box that has only an antenna output, connect a 75-ohm coaxial cable (not provided) from the source to the ANT/CABLE input on the TV. Owner's Guide Television Connections Connecting an antenna, cable, or satellite box TCL 55S455 55" Class 4series 4k Uhd Hdr Led Smart Roku Tv - Use Manual - Use Guide PDF.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |